One Job • One Person • Just Right for Both    Follow CTR Jobs on Twitter Visit CTR on Facebook All CTR Jobs RSS Feed
 

 

BASE STORE CLERK, with Active Secret Clearance: Will be trained

2 TEMP-HIRE POSITIONS (after 90 Days)

INDUSTRY: GOVERNMENT SITE

LOCATION: PENINSULA

PAY RANGE: $11.04 per Hour

Must be willing to work evenings until 6:30pm

SUMMARY:

Store Clerk will assist Base Store Manager in required areas of store operation. Seeking personnel with bright smiles and friendly can-do attitude.

  • Operate Base Store in the temporary absence of the Manager
  • Open and closer Store as needed
  • Process incoming and outgoing mail and packages (UPS, FedEx, US Postal Service)
  • Hand out packages and mail
  • Process dry cleaning tickets
  • Food and beverage service preparation
  • Order, receive, and stock merchandise
  • Clear cash register and balance funds
  • Process cash and credit card payments
  • Basic cleaning

REQUIREMENTS:

  • High school diploma or equivalent
  • Able to use calculator and cash register
  • General computer knowledge
  • Able to handle cash and give back correct change
  • Prior retail experience or willing to learn retail, buying, and bookkeeping
  • Strong communication and customer service skills
  • Able to lift up to 70lbs
  • Active Secret Clearance required; must be willing to obtain top secret clearance
  • Must be US citizen
  • Valid driver's license

EOE M/F



To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

Recruiter: Heidi Elam       
eMail a friend about this job

STORE CLERKS, with Active Secret Clearance

2 TEMP-HIRE POSITIONS (after 90 Days) 

INDUSTRY: GOVERNMENT SITE

LOCATION: Peninsula

PAY RANGE: $11.04 per Hour

Must be willing to work until 6:30pm 

SUMMARY:

Store Clerk will assist Base Store Manager in required areas of store operation. Seeking personnel with bright smiles and friendly can-do attitude.

_____________________________________________________________________________________________________________________________________________ 


CULINARY STAFF, COOK I and COOK II, with Active Secret Clearance

5 TEMP-HIRE POSITIONS (after 90 Days) 

INDUSTRY: GOVERNMENT SITE

LOCATION: WILLIAMSBURG

PAY RANGE: $10.50 - $14 per Hour DOE

SUMMARY:

Seeking Culinary Personnel, Cooks I and Cooks II, who possess an active Secret Security Clearance. Will assist the shift supervisor in the preparation and presentation of all meals served in the dining hall and other facilities. Will be responsible for breakfast, lunch, or dinner preparation, set up, replenishing during service and breakdown of the hot entrée line.

______________________________________________________________________________________________________________________________________________ 

AUTOMOTIVE TECHNICIANS with Active Secret Clearance

2 TEMP-HIRE POSITIONS (after 90 Days)

INDUSTRY: GOVERNMENT FACILITY

LOCATION: Peninsula, VA

Day Shift, 40 hours per week, with minimal overtime

SUMMARY:

Serve as Automotive Technician on passenger carrying vehicles, trucks, and trailers of all sizes. service, repair, and overhaul various types of vehicles.

_______________________________________________________________________________________________ 

Job Requirements for all Positions:

  • Active Secret Clearance required; must be willing to obtain top secret clearance
  • Must be US citizen
  • Valid driver's license

    EOE  M/F



  • To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    REFRIGERATION TECHNICIAN

    A CONTRACT POSITION

    INDUSTRY: SHIPYARD

    LOCATION: NORFOLK, VA 

    PAY RATE: $21 per hour 


     

    REQUIREMENTS: 

    • Minimum 4 years’ maritime experience
    • Shipboard experience preferred
    • Must qualify for base access
    • Ability to pass drug screening 
    • Security Clearance preferred, but not required

     

    EOE M/F 

     

     


    Must-have Qualifications:



    US Citizenship required.

    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MARINE ELECTRICIAN

    A CONTRACT POSITION

    INDUSTRY: SHIPYARD

    LOCATION: NORFOLK, VA 

    PAY RATE: $21 per hour 


     

    REQUIREMENTS: 

    • Minimum 4 years’ maritime experience
    • Must qualify for base access
    • Ability to pass drug screening 
    • Security Clearance preferred, but not required

     

    EOE M/F 

     

     


    Must-have Qualifications:



    US Citizenship required.

    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    ACCOUNTING CLERK

    A DIRECT-HIRE POSITION

    INDUSTRY: STAFFING / RECRUITING 

    LOCATION: NEWPORT NEWS

    40 HOURS / WEEK


    Job Description

    We are currently looking for an Accounting Clerk for a high volume, fast paced environment. Emphasis will be on Payroll, but other duties include Invoicing, Subsidiary Ledgers, Journal Entries.

      Duties include:

    • Receiving and verifying timesheets.
    • Inputting timesheets into the payroll system.
    • Importing time from online time portal
    • Posting transactions into Excel Spreadsheets.
    • Calculating, verifying and analyzing transactions
    • Assist accounting manager in other tasks as required such as Invoicing, Subsidiary Ledgers
    • Must understand journal entries / reversing entries

     

    Job Requirements

    • Previous experience preparing high volume payroll.
    • Strong computer skills and ability to learn new software packages quickly.
    • Attention to Detail a must.

      

    EOE  M/F

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    EDM WIRE MACHINE OPERATOR

    A TEMP-HIRE POSITION

    LOCATION: CHESAPEAKE

    INDUSTRY: MACHINE SHOP

     

    Seeking an experienced EDM wire machine Set Up person and Operator with  2-3 years of experience. Will be operating the Charmilles Robofil 240 machine type.

     

    EOE  M/F 



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    CNC MACHINIST / PROGRAMMER

    A TEMP-HIRE POSITION (after 90 days)

    INDUSTRY: MACHINE SHOP

    LOCATION: CHESAPEAKE

    PAY RANGE: $20 - 28 per hour DOE

     

    REQUIREMENTS:

    • Minimum 3-4 years of Job Shop machining experience
    • Ability to program using MasterCAM or similar package would be a plus
    • Experience with Lathe and Mill (e.g. Haas or Fanuc controls)
    • Must be able to machine from blueprints
    • Must have own tools

     

    EOE M/F

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MATERIAL CONTROL / EXPEDITOR

    A TEMP-HIRE POSITION

    INDUSTRY: MACHINE SHOP 

    LOCATION: CHESAPEAKE

    INDUSTRY: MACHINE SHOP

     

    REQUIREMENTS:

    • Minimum three years of expediting experience.  
    • Experience with shipment of components highly desirable
    • Former military with logistics/expediting excperience welcome to apply

    EOE  M/F



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    PLANNER / ESTIMATOR

    A DIRECT-HIRE POSITION

    INDUSTRY: MACHINE SHOP

    LOCATION: CHESAPEAKE

     

    Seeking a Planner/Estimator with AutoCAD experience. Some kind of machine shop experience preferred. 3-4 years of Government and Manufacturing experience needed.

     

    EOE M/F 



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    STRUCTURAL WELDERS, SHIPYARD

    3 CONTRACT POSITIONS

    INDUSTRY: SHIP REPAIR

    LOCATION NORFOLK, VA

     

    Seeking two 1st Class GTAW SS Structural Welders and three SMAW CS Structural Welders. Must be rapidgate eligible with own tools. Will work 10 hour days for 6 days per week.

     

     

    EOE M/F 



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    FIREWATCH / LABORERS

    4 CONTRACT POSITIONS 

    INDUSTRY: SHIPYARD

    LOCATION: NORFOLK

     

    SUMMARY:

    • Watch out for fire hazards in the workplace
    • Keep flammable materials from ignition sources
    • Prepared to operate fire extinguishers
    • Maintain constant means of communication.
    • As much as possible, keep visual and voice contact with other employees.
    • Be prepared to operate fire extinguishers, hydrants, fixed monitors, and hose carts anytime.
    • Return all firefighting equipment to original location

     REQUIREMENTS:

    • Rapid Gate eligible
    • Able to pass background check
    • Able to work 10-hour days 6 days/week

     

    EOE  M/F 

     

     

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    DECK TILE INSTALLERS / PCMS INSTALLERS

    Several CONTRACT POSITIONS

    INDUSTRY: SHIPYARD

    CITY: NORFOLK 

    PAY RANGE: $ 18-20 per Hour 

     

    Must be RapidGate eligible.

     

     

    EOE  M/F

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    RECRUITER TRAINEE: Recent College Grads Welcome

    A TEMP-HIRE POSITION

    INDUSTRY: STAFFING & RECRUITING

    LOCATION: NEWPORT NEWS

    Hourly Pay Rate plus performance bonus

      

    SUMMARY:

    We are a professional recruiting company with 29 years in the industry.  We have a surplus of skilled trades, technical, and professional positions that need to be filled. Successful candidate will be trained  to develop strong search, screening, and interviewing skills in recruiting for these positions.

     

    REQUIREMENTS:

    • Associate's or Bachelor's degree in Communications, Business Administration, or related discipline preferred
    • Willing to adapt and eager to learn
    • Excellent verbal and written communication skills
    • Excellent interpersonal skills
    • Good work ethic
    • Good organization and time management
    • Team player

    EOE  M/F

     

     



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    MANUFACTURING TECHNICIANS

    2 TEMP-HIRE POSITIONS

    INDUSTRY: MANUFACTURING

    LOCATION: NEWPORT NEWS


     

    REQUIREMENTS:

    • Associate's degree in Technical field
    • 3-4 years of experience in production maintenance environment
    • Mechanical and electrical troubleshooting skills in repairing and adjusting automated manufacturing equipment
    • Knowledge of Robotics, Pneumatics, Hydraulics, Electricity, Electronics, and PLC's
    • Preferred: 3-4 years high volume automated assembly and test equipment experience

     

    EOE M/F 



    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

    Recruiter: Heidi Elam       
    eMail a friend about this job

    1ST Class WELDERS

    5 CONTRACT POSITIONS

    INDUSTRY: SHIPYARD

    LOCATION: NORFOLK, VA

      

    SUMMARY: 

    Seeking1st Class Welders with shipyard experience.

       

    REQUIREMENTS: 

    • 5 years of experience in ship repair
    • Must be able to pass a FCAW and SMAW weld test, All Positions
    • Must be able to operate JLG / Aerial Lift
    • Must have own hand tools
    • Ability to pass criminal background check
    • Ability to pass drug screening

    EOE  M/F 


    Must-have Qualifications:

       




      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      SHIP FITTERS

      10 CONTRACT POSITIONS

      INDUSTRY: SHIP REPAIR

      LOCATION: NORFOLK 

       

       

      REQUIREMENTS:

      • Minimum 5 years of experience in Ship Repair
      • Ability to read and interpret blueprints
      • Tack welding
      • Must have basic hand tools 

       

      EOE M/F 

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      STORE CLERK, with Active Secret Clearance

      2 TEMP-HIRE POSITIONS (after 90 Days) 

      INDUSTRY: GOVERNMENT SITE

      LOCATION: WILLIAMSBURG

      PAY RANGE: $11.04 per Hour

      Must be willing to work evenings until 6:30pm 

       

      SUMMARY:

      Store Clerk will assist Base Store Manager in required areas of store operation. Seeking personnel with bright smiles and friendly can-do attitude.

      • Operate Base Store in the temporary absence of the Manager
      • Open and close Store as needed
      • Process incoming and outgoing mail and packages (UPS, FedEx, US Postal Service)
      • Hand out packages and mail
      • Process dry cleaning tickets
      • Food and beverage service preparation
      • Order, receive, and stock merchandise
      • Clear cash register and balance funds
      • Process cash and credit card payments
      • Basic cleaning

       REQUIREMENTS:

      • High school diploma or equivalent 
      • Able to use calculator and cash register
      • General computer knowledge
      • Able to handle cash and give back correct change
      • Prior retail experience or willing to learn retail, buying, and bookkeeping
      • Strong communication and customer service skills
      • Able to lift up to 70lbs
      • Active Secret Clearance required; must be willing to obtain top secret clearance
      • Must be US citizen
      • Valid driver's license

       

      EOE   M/F 

       

       

       

       

       

       



      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

      Recruiter: Heidi Elam       
      eMail a friend about this job

      OUTSIDE MACHINISTS with Clearance

      10 CONTRACT POSITIONS AVAILABLE

      INDUSTRY: NAVY SHIP REPAIR 

      LOCATION: HONOLULU, HI

      PAY RATE: $29 per hour + $123/day Per Diem plus Travel


         

        REQUIREMENTS: 

        • Must pass a PMI test (Precision measurement: calipers, micrometers, digital and conventional.
        • Submarine experience a big plus
        • Must have active Secret Security Clearance
        • Must be eligible for Rapidgate badge

         

        EOE   M/F

         

         

         



        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

        Recruiter: Heidi Elam       
        eMail a friend about this job

        OUTSIDE MACHINISTS with Clearance

        10 CONTRACT POSITIONS AVAILABLE

        INDUSTRY: NAVY SHIP REPAIR 

        LOCATION: PORTSMOUTH, NH

        PAY RATE: $29 per hour + $59/day Per Diem plus Travel


           

          REQUIREMENTS: 

          • Must pass a PMI test (Precision measurement: calipers, micrometers, digital and conventional.
          • Submarine experience a big plus
          • Must have active Secret Security Clearance
          • Must be eligible for Rapidgate badge

           

          EOE   M/F

           

           

           



          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

          Recruiter: Heidi Elam       
          eMail a friend about this job

          OUTSIDE MACHINISTS with Clearance

          10 CONTRACT POSITIONS AVAILABLE

          INDUSTRY: NAVY SHIP REPAIR 

          LOCATION: NORFOLK, VA

          PAY RATE: $29 per hour + $51/ day Per Diem plus Travel


             

            REQUIREMENTS: 

            • Must pass a PMI test (Precision measurement: calipers, micrometers, digital and conventional.
            • Submarine experience a big plus
            • Must have active Secret Security Clearance
            • Must be eligible for Rapidgate badge

             

            EOE   M/F

             

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MARKETING COMMUNICATIONS MANAGER, GLOBAL

            A DIRECT-HIRE POSITION with Excellent Benefits 

            INDUSTRY: MANUFACTURING

            LOCATION: CHESAPEAKE, VA

             

            SUMMARY:

            Will be responsible for directing, integrating, and standardizing all global Marketing Communications activities for the company. Manage and develop the global website, corporate brand, and centralize marketing assets. Will be reporting directly to corporate headquarters in Asia, mostly remotely with some travel required.

              

             REQUIREMENTS:

            • Bachelor's degree in Marketing, Business, or Communications; Master's preferred
            • 5 years of Strategic Marketing and International Marketing experience
            • Excellent project management skills
            • Experience managing cross-cultural teams in a global setting
            • Digital marketing skills; web strategy and search engine marketing (SEM) a plus
            • Knowledge of marketing fundamentals: marketing mix, segmentation, positioning, targeting, and differentiation with respect to Power Transmission
            • Familiarity with current digital and social media technology and ability to best leverage for marketing programs
            • Knowledge of HTML, Drupal, Email Campaign Systems, and Social Media Channels
            • Multilingual skills would be a plus

             

               

            EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CARPENTER: BUILDING MAINTENANCE

            A TEMP-HIRE POSITION

            INDUSTRY: MANUFACTURDING

            LOCATION: RICHMOND, VA

            PAY RATE: $14 per Hour 

             

             

             

            EOE   M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CALIBRATION TECHNICIAN: METROLOGY LAB

            A CONTRACT POSITION: Indefinite Time Frame

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS  


            REQUIREMENTS:

            • Metrology Lab or PMEL background strongly preferred
            • Ability to calibrate rings, plugs, micrometers, calipers, dial indicators

             

            EOE / M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            WAREHOUSE MANAGER

            A TEMP-HIRE POSITION after 90 Days

            INDUSTRY: SHIP REPAIR

            LOCATION: VIRGINIA BEACH

             

            SUMMARY:

            Responsible for managing the warehouse in keeping with company policies and procedures. Supervises receiving, warehousing, material issue and disposal. Must comply with FAR / DFAR requirements for handling of government material. Will set up the warehouse layout to ensure efficient space utilization.

             

            REQUIREMENTS:

            • Must have minimum 5 years of experience as Warehouse Supervisor
            • Naval Logistics knowledge strongly preferred
            • Must be familiar with government property management
            • Experience working with drawings for ship related material a big plus
            • Must have strong verbal and written communications skills
            • MS Office skills required
            • Familiarity with barcode system such as WASP barcode.

            EOE  M/F 

             


             
            EOE M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            OUTSIDE MACHINISTS, 1st Class

            4 CONTRACT POSITIONS

            INDUSTRY: SHIPYARD

            LOCATION: NORFOLK, VA 

            PAY RATE: $20 per hour 


             

            REQUIREMENTS: 

            • Minimum 4 years’ commercial / naval experience as a Machinist
            • Must read blueprints, schematics
            • Must have underwater experience
            • Must have own tools
            • Must have RAPIDGate in hand
            • Ability to pass drug screening 

             

            EOE M/F 

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CMM PROGRAMMER / OPERATOR

            A TEMP-HIRE POSITION

            INDUSTRY: MACHINE SHOP

            LOCATION: CHESAPEAKE

             

            REQUIREMENTS:
            --Experience with Dimensional Inspection
            --CMM Programming Experience, using 3D CAD coordinate systems
            --Able to pass background check

             

            EOE   M/F
             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            ENVIRONMENTAL, HEALTH & SAFETY MANAGER

            A TEMP-HIRE POSITION w. Excellent Benefits

            INDUSTRY: SHIP REPAIR

            LOCATION: VIRGINIA BEACH, VA

             

            Will be responsible for maintaining and developing Occupational Health and Safety and Environmental programs that supports the safe production activities according to Company's safety and environmental policy and all federal, state and local regulations.

             

            REQUIREMENTS:

            • B.S. degree in Environmental Sciences or 5 years of equivalent experience
            • Must currently possess or be able to obtain a Secret Government Security Clearance.
            • Able to work onboard ship.

             

            EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            TALENT ACQUISITION REPRESENTATIVE 1

            A CONTRACT POSITION for 4 Months

            INDUSTRY: SHIP REPAIR

            LOCATION: NORFOLK

            PAY RANGE: $21 - $23 per hour 

             

            SUMMARY:

            Conduct interviews to recruit prospective employees an refer job applicants to specific job openings. Evaluate job experience, education and training, skills, knowledge and abilities, physical and personal qualifications, and other employment factors.  Prepare rating on applicants, make recommendations on starting salaries, and provide applicants with information on the company. May administer tests and interpret results, check references, arrange transportation of selected applicants, extend formal job offers, and work with outside agencies and vendors.

             

            REQUIREMENTS:

            Candidate must have previous recruitment and Applicant Tracking System (ATS) experience. Must have experience recruiting and screening applicants.

             

            EOE  M/F 

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            MAINTENANCE MECHANIC

            A TEMP-HIRE POSITION (after 90 days)

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS

            PAY RATE: $17 per hour

             

            JOB DESCRIPTION:

            Will maintain and repair machinery, equipment, physical structures, pipe and electrical systems according to specifications, blueprints, manuals, schematics. Will use hand tools, power tools, hoist, crane, and measuring and testing instruments.

             

            REQUIREMENTS:

            • Must have working knowledge of standard tools, methods and practices involved in industrial maintenance repair, incl. Plumbing, Electrical, Painting, Welding, Boiler, Refrigeration Repair and Pipefitting.
            • Safe work practices, ability to estimate materials and labor needed
            • Ability to make mathematical calculations quickly and accurately 
            • Able to operate and care for electrical and refrigeration systems 

             

            EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            ADMINISTRATIVE ASSISTANT, Part-Time for CPA Firm

            College Seniors  or Recent Grads Welcome to apply

            A CONTRACT POSITION until mid-April. 15-20 hours per week, flexible schedule 

            LOCATION: WILLIAMSBURG

            INDUSTRY: ACCOUNTING 

            PAY RATE: $11 per hour

             

            Brief Summary:

            Established CPA firm is seeking an Administrative Assistant to assist during tax season with copying and assembling tax returns. Will be taught.

            REQUIREMENTS:

            • College Seniors or Recent College Graduates with some administrative experience welcome to apply
            • Prior Administrative experience
            • Excellent communication skills
            • Able to follow directions
            • Great attention to detail
            • MS Word and Excel experience

            EOE  M/F 



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CULINARY STAFF, COOK I and COOK II, with Active Secret Clearance

            5 TEMP-HIRE POSITIONS (after 90 Days) 

            INDUSTRY: GOVERNMENT SITE

            LOCATION: WILLIAMSBURG

            PAY RANGE: $10.50 - $14 per Hour DOE

            1st Shift: 5:45am - 2:15pm Mon - Fri

            2nd Shift: 11am - 7:30pm Mon - Fri

            Sat, Sun: 7:30am - 7pm

             

            SUMMARY:

            Seeking Culinary Personnel, Cooks I and Cooks II, who possess an active Secret Security Clearance. Will assist the shift supervisor in the preparation and presentation of all meals served in the dining hall and other facilities. Will be responsible for breakfast, lunch, or dinner preparation, set up, replenishing during service and breakdown of the hot entrée line.

             

            REQUIREMENTS:

            • Minimum 2 years of culinary experience
            • Former military Culinary Specialists ideal 
            • Culinary skills such as sautéing, braising, roasting, poaching, baking, frying, etc.
            • Knowledge of the variety of foods and recipes offered on the four-week cycle menu
            • Knowledge of industry standards such as sanitation
            • Required to wear uniforms provided as well as safety shoes while on duty
            • Active Secret Clearance required
            • Must be US citizen
            • Valid driver's license

             

            EOE   M/F 

             

             

             

             

             

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            INSIDE MACHINISTS

            2 TEMP-HIRE POSITIONS, after 90 Days

            INDUSTRY: MACHINE SHOP

            LOCATION: CHARLESTON, SC

             

            SUMMARY:

            Seeking Inside Machinists who are experienced with portable machining, flange basing, line boring, etc.

             

            REQUIREMENTS:

            • Minimum 3 years of experience operating manual lathe and mill
            • Experience with in place machining
            • Experience with flange basing, line boring
            • Ability to read blueprints
            • Own tools
            • Must pass background check

            EOE   M/F



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            CONVENTIONAL MACHINIST

            TEMP-HIRE POSSIBLE

            INDUSTRY: MACHINE SHOP

            LOCATION: NEWPORT NEWS

            HOURLY PAY: $17.50 - $23 per hour

             

            SUMMARY:

            Set up and operate a variety of machine tools such as Lathes, Milling, Shapers, Planers, Precision Grinders to make parts, mechanisms, machines, to exacting tolerances. Interpret Blueprints, Sketches, Engineering Specifications.

             

            REQUIREMENTS:

            • Minimum 2 years of experience operating manual lathe and mill 
            • Minor CNC Machining experience
            • Ability to read blueprints
            • Own tools required

            EOE     M/F

             



            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

            Recruiter: Heidi Elam       
            eMail a friend about this job

            PLC PROGRAMMER / TROUBLESHOOTER

            A TEMP-HIRE POSITION

            INDUSTRY: MANUFACTURING

            LOCATION: NEWPORT NEWS

            PAY RANGE: up to $30 per hour

            1st Shift

             

            REQUIREMENTS:

            • Must be very experienced with PLC programming and troubleshooting
            • Must have experience with Allen Bradley 5000 software and drives
            • Square D ProWorx NXT experience a plus

             

            EOE  M/F

             

             

             

             


            Must-have Qualifications:

               




                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                Recruiter: Heidi Elam       
                eMail a friend about this job

                PLANT EQUIPMENT MAINTENANCE MECHANICS

                2 TEMP-HIRE POSITIONS with Excellent Benefits

                INDUSTRY: MANUFACTURING

                LOCATION: NEWPORT NEWS

                PAY RANGE: up to $30 per hour

                1st Shift 

                 

                SUMMARY: 

                Seeking Plant Maintenance Technicians to work on line equipment and robotics. 


                REQUIREMENTS:

                • Minimum 5 years of experience in equipment maintenance: Electrical, PLC's, and Mechanical
                • Experience working on line equipment and robotics
                • Strong background in PLC's required
                • Must have own tools

                 

                EOE  M/F

                 

                 

                 

                 


                Must-have Qualifications:

                   




                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                    Recruiter: Heidi Elam       
                    eMail a friend about this job

                    A TEMP-to-HIRE POSITION (after 30 days)

                    Seeking a CNC machinist in Portsmouth, VA. within a machine shop industry.


                    Must-have Qualifications:

                    • Minimum 5 years of job shop machining experience
                    • Heavy experience with Mazak lathes preferred
                    • Must be able to machine from blueprints
                    • Must have own tools



                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                    Recruiter: Heidi Elam       
                    eMail a friend about this job

                    CARPENTER / JOURNEYMAN: BUILDING MAINTENANCE

                    A TEMP-HIRE POSITION

                    INDUSTRY: MANUFACTURDING

                    LOCATION: RICHMOND, VA

                    PAY RATE: $18 per Hour 

                     

                     

                     

                    EOE   M/F 



                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                    Recruiter: Heidi Elam       
                    eMail a friend about this job

                    MAINTENANCE TRADE MECHANIC

                    A DIRECT-HIRE POSITION (after 60 Days)

                    INDUSTRY: MANUFACTURING

                    LOCATION: VIRGINIA BEACH

                    PAY RANGE: $12 - $18 per Hour 

                     


                    SUMMARY: 

                    Utilize practical skill and knowledge in trades such as Sheet Metal, Machining, Finishing, and Assembly. Will be guided by immediate Supervisor and work alongside an experienced mechanic.

                     

                    REQUIREMENTS:

                    • Ability to read and interpret blueprints, sketches, drawings, manuals, and specifications 
                    • Experience operating Lathes, Mills, Spot-Welder, Plasma Cutter, Press Brakes, Shears, Punches, Rollers, Drill, Presses, Band Saws to fabricate parts to specifications
                    • Experience with hand tools such as grinders, drills, rivet guns, saws, scribes, calipers, protractor, and combination squares.
                    • Able to verify dimensions and alignment of assemblies.

                     

                    EOE  M/F 

                     

                     

                     

                     

                    EOE M/F 



                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                    Recruiter: Heidi Elam       
                    eMail a friend about this job

                    INDUSTRIAL ELECTRICIAN: PLANT MAINTENANCE

                    A CONTRACT POSITION for 6 Months

                    INDUSTRY: MANUFACTURING

                    LOCATION: HAMPTON

                    PAY RATE: $20 - $24 per hour 


                    SUMMARY:

                    Seeking an Electrician who is experienced primarily with electrical and some mechanical troubleshooting and repair for plant maintenance.

                     

                    EOE  M/F

                     

                     

                     

                     


                    Must-have Qualifications:

                       




                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                        Recruiter: Heidi Elam       
                        eMail a friend about this job

                        ELECTRICAL DRIVE ENGINEER / TEAM LEAD: AC & DC DRIVE SYSTEMS

                        A DIRECT-HIRE POSITION with Outstanding Benefits. Relocation Assistance is Available.

                        INDUSTRY: MANUFACTURING

                        LOCATION: NEWPORT NEWS, VA 

                         

                         SUMMARY:
                        summar

                        Coordinate and implement hardware and software efforts related to electrical drive systems on mining trucks. Lead a team of engineers to research, develop, and test electric drive systems used in large trucks. Will also be working as an Electrical Drive Engineer 40% of the time.

                         REQUIREMENTS:

                        • B.S. degree in Electrical Engineering and 8 years of experience or equivalent combination of education and experience
                        • Proficient in design and theoretical principles of AC drive systems
                        • Knowledge of truck systems and interaction between systems, including drive systems, control systems, hydraulic systems, and mechanical systems
                        • Knowledge of software programming tools such as CoDeSys, C++, etc.
                        • Knowledge of diagnostic tools needed to verify software stability and function
                        • Able to optimally define components related to the truck drive system
                        • Knowledge of communication networks and vehicle communication bus architecture
                        • Knowledge of signal processing techniques and feedback control systems
                        • Knowledge of AC drive control theory
                        • Experience with simulation tools such as Matlab
                        • Knowledge of project management principles and tools (MS Project)
                        • Knowledge of BaaN system related to truck BOM structure and inventory control
                        • Ability to read and write electrical schematics
                        • Familiarity with advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutatio

                           

                              EOE   M/F

                           



                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                          Recruiter: Heidi Elam       
                          eMail a friend about this job

                          NATIONAL MANAGER, PRODUCT SUPPORT: ROTATING MACHINERY

                          A DIRECT-HIRE POSITION

                          INDUSTRY: MANUFACTURING

                          LOCATION: CHESAPEAKE, VA

                          SALARY RANGE: $95K - $119K

                           

                          REQUIREMENTS:

                          • Bachelor's Degree in Business, Engineering or related field or equivalent combination of education and experience.
                          • Industrial Sales experience and/or experience managing operations and sales in an industrial repair facility
                          • Strong knowledge of preventive maintenance technologies and methods
                          • Thorough understanding of the operating characteristics of rotating machinery
                          • Strong written and oral communication skills required.
                          • Working knowledge of Microsoft Office (Word, Excel, and PowerPoint).
                          • Ability to gather and analyze data and produce reports.
                          • 20% Travel required

                          EOE  M/F 

                           



                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                          Recruiter: Heidi Elam       
                          eMail a friend about this job

                          BUSINESS DEVELOPMENT MANAGER: ROTATING EQUIPMENT EXPERIENCE

                          A DIRECT-HIRE POSITION

                          INDUSTRY: MANUFACTURING

                          LOCATION: CHESAPEAKE, VA

                          SALARY: Negotiable

                           

                          REQUIREMENTS:
                          • Bachelor's Degree in Business or Engineering, Master's Degree is preferred  
                          • Ten (10) years of sales experience in the mechanical power transmission market (Variable Speed Drives - Mechanical & Electrical, Industrial Electric Motors). 
                          • Extensive experience with Strategy Development, Budget Management, and Project Management. 
                          • Must be proactive, outgoing, self-motivated and self-directed with a strong record of sales/market planning, client development, and follow through and overcoming barriers to sales.
                          • Strong written and oral communication skills required.

                          • Demonstrated technical strengths in strategic selling disciplines.
                          • Working knowledge of Microsoft Office (Word, Excel, and PowerPoint).
                          • 30-50% Travel required• Membership in various industry organizations is preferred

                          EOE  M/F 

                           



                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                          Recruiter: Heidi Elam       
                          eMail a friend about this job

                          HEAVY FITTERS / INDUSTRIAL FITTERS

                          2 CONTRACT POSITIONS

                          INDUSTRY: STEEL FABRICATION

                          LOCATION: CHESAPEAKE, VA

                          PAY RATE $22 - $24 per Hour

                           

                          SUMMARY: 

                          Seeking an Industrial Shop Fitter with Heavy Metal experience. Millwright preferred. Blueprints, Layout, Cut (Torch), Assemble, Fit Heavy Steel, Tack Weld.

                           

                           

                          EOE  M/F



                          To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                          Recruiter: Heidi Elam       
                          eMail a friend about this job

                          MEDICAL GAS PLUMBERS

                          3 CONTRACT POSITIONS

                          INDUSTRY: COMMERCIAL CONSTRUCTION

                          LOCATION: RICHMOND, VA

                          PAY RATE: $25 per hour

                            

                          SUMMARY: 

                          Seeking Commercial Plumbers with experience in Field Plumbing and / or Medical Gas operations. 

                           

                          REQUIREMENTS: 

                          • HS diploma, GED or equivalent work experience 
                          • 5 years of Commercial Plumbing experience in Field Plumbing and / or Medical Gas operations
                          • Current medical gas card
                          • VA State Plumbing Journeyman
                          • Brazing continuity for the past year
                          • Ability to read and interpret blueprints
                          • Extensive knowledge of all plumbing systems installation. Will be tested during hiring process.
                          • Obtain required personal hand tools
                          • Lift 50lbs
                          • Work off ladders and at heights for an entire shift
                          • Card would be a plus
                          • Prior military experience a plus

                           

                          EOE  M/F

                           

                           

                             

                             

                             

                             



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            SENIOR HVAC SERVICE TECHNICIANS: INDUSTRIAL 

                            2 TEMP-HIRE POSITIONS

                            INDUSTRY: INDUSTRIAL CONSTRUCTION

                            LOCATION: RICHMOND, VA

                            PAY RATE: $22 per hour

                             

                            SUMMARY:

                            Service, troubleshoot, repair, and clean heating and cooling equipment and related systems (i.e. Boiler, forced air, hydronic, split systems, package units, make up air and exhaust systems, and controls).

                             

                            REQUIREMENTS: 

                            • High School diploma / GED
                            • 5+ years of commercial industry HVAC service experience
                            • HVAC Journeyman / Master certification preferred.
                            • Working knowledge of boiler, chillers, industrial HVAC equipment, and BAS troubleshooting, repair and maintenance
                            • Knowledge of basic electricity & electrical and control systems
                            • Ability to read and work from blueprints, specifications, and schematics
                            • Military experience a plus
                            • Must have a satisfactory driving record
                            • Able to pass background check
                            • Pass drug screening

                             

                            EOE M/F 

                             



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            FIRE PROTECTION SPRINKLER DESIGNER

                            A TEMP-HIRE POSITION (after 90 Days)

                            INDUSTRY: INDUSTRIAL CONSTRUCTION

                            LOCATION: RICHMOND, VA

                             

                            SUMMARY:

                            Prepare design drawings (i.e. layout form systems descriptions) for Fire Protection Projects.

                             

                            REQUIREMENTS:

                            • High school diploma
                            • 5-10 years of related design experience
                            • AutoCAD drafting proficiency
                            • Working knowledge of HydraCAD sprinkler design software
                            • Experience with at least one 3D CADD program and BIM
                            • Provide examples of large contract work performed during career
                            • Microsoft Word and Excel proficiency

                             

                            EOE  M/F 



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            FIRE PROTECTION SPRINKLER FITTER

                            A TEMP-HIRE POSITION (after 90 Days)

                            INDUSTRY: INDUSTRIAL CONSTRUCTION

                            LOCATION: RICHMOND, VA

                            PAY RATE: $15 per Hour

                             

                            SUMMARY:

                            Responsible for installation, testing, inspecting, and certifying of automatic fire suppression systems.

                             

                            REQUIREMENTS:

                            • High school diploma or equivalent
                            • Minimum 2 years of experience installing fire sprinkler systems
                            • NICET or State equivalency, and backflow certification preferred
                            • Able to lift up to 50lbs
                            • Must have satisfactory driving record
                            • Able to pass background check
                            • Able to pass drug screening

                             

                            EOE  M/F 



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            FIRE PROTECTION SPRINKLER FITTER FOREMEN

                            3 TEMP-HIRE POSITIONS (after 90 Days)

                            INDUSTRY: INDUSTRIAL CONSTRUCTION

                            LOCATION: RICHMOND, VA

                            PAY RATE: $19 per Hour

                             

                            SUMMARY:

                            Responsible for daily activities of assigned personnel on the assembly, installation, testing, and repair of pipes, fittings, and fixtures for fire protection sprinkler systems.

                             

                            REQUIREMENTS:

                            • High school diploma or equivalent
                            • Minimum 5 years of experience in Fire Sprinkler Installation
                            • Minimum 2 years or experience as Foreman
                            • NICET I certification preferred
                            • Able to lift up to 50lbs
                            • Must have satisfactory driving record
                            • Able to pass background check
                            • Able to pass drug screening

                             

                            EOE  M/F 



                            To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                            Recruiter: Heidi Elam       
                            eMail a friend about this job

                            PLUMBER JOURNEYMAN

                            6 TEMP-HIRE POSITIONS, after 90 Days

                            INDUSTRY: COMMERCIAL CONSTRUCTION

                            LOCATION: RICHMOND, VA

                            PAY RATE: $23 per hour

                             

                             

                            REQUIREMENTS: 

                               

                              • 5 years of Commercial Plumbing experience in Field Plumbing operations
                              • Must have active Virginia State Plumbing Journeyman card
                              • Able to read and interpret blueprints
                              • Extensive knowledge of all plumbing systems installation, which will be tested during hiring process
                              • Ability to fabricate offsets
                              • Clean Background and ability to pass drug test

                               

                              EOE  M/F

                               

                               

                                 

                                 

                                 

                                 



                                To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                Recruiter: Heidi Elam       
                                eMail a friend about this job

                                SHEET METAL GENERAL LABORERS: MECHANICAL CONSTRUCTION

                                2 CONTRACT POSITIONS

                                INDUSTRY: COMMERCIAL CONSTRUCTION

                                LOCATION: RICHMOND, VA

                                PAY RATE: $11 per hour

                                  

                                SUMMARY: 

                                Will assist mechanics with fabrication, assembly, installation, and repairs of sheet metal products, equipment and ductwork.

                                 

                                REQUIREMENTS: 

                                • High school diploma / GED preferred
                                • Knowledge of trade related hand tools
                                • Experience in Construction / Industrial environment preferred
                                • Must have satisfactory driving record
                                • Must be able to work overtime
                                • Lift 50lbs
                                • Prior military experience preferred
                                • Able to pass background check
                                • Able to pass drug test

                                 

                                EOE  M/F

                                 

                                 

                                   

                                   

                                   

                                   



                                  To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                  Recruiter: Heidi Elam       
                                  eMail a friend about this job

                                  SHEET METAL HELPERS: NEW CONSTRUCTION

                                  5  CONTRACT POSITIONS

                                  INDUSTRY: COMMERCIAL CONSTRUCTION

                                  LOCATION: RICHMOND, VA

                                  PAY RATE: $17 per hour

                                    

                                  SUMMARY: 

                                  Extensive knowledge in the assembly, installation, and repair of sheet metal ducts, flex, dampers, and equipment of heading, cooling, and exhaust air systems according to SMACNA or mechanical codes.

                                   

                                  REQUIREMENTS: 

                                  • High school diploma / GED preferred
                                  • 4+ years of sheet metal mechanic experience in construction / industrial environment
                                  • Familiar with ductmate, spiral, slide, and drive ductwork
                                  • Must have satisfactory driving record
                                  • Must be able to work overtime
                                  • Lift 50lbs
                                  • Prior military experience preferred
                                  • Able to pass background check
                                  • Able to pass drug test

                                   

                                  EOE  M/F

                                   

                                   

                                     

                                     

                                     

                                     



                                    To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                    Recruiter: Heidi Elam       
                                    eMail a friend about this job

                                    MULTI-CRAFT CARPENTER

                                    A CONTRACT POSITION

                                    INDUSTRY: COMMERCIAL CONSTRUCTION

                                    LOCATION: RICHMOND, VA

                                    PAY RATE: $19 - $26 per hour

                                      

                                     

                                    REQUIREMENTS: 

                                    • Multi-craft background: Carpentry, Plumbing, Cement, Drywall, etc.
                                    • Lift more than 75lbs
                                    • Must have driver's license and transportation
                                    • Clean background for more than 7 years
                                    • Able to pass drug test

                                     

                                    EOE  M/F

                                     

                                     

                                       

                                       

                                       

                                       



                                      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                      Recruiter: Heidi Elam       
                                      eMail a friend about this job

                                      TECHNICAL ILLUSTRATORS 2

                                      2 DIRECT-HIRE POSITIONS with Excellent Benefits

                                      LOCATION: NEWPORT NEWS, VA

                                      INDUSTRY: MANUFACTURING

                                      SALARY RANGE: $55K - $65K

                                       

                                      SUMMARY:

                                      Will review engineer drawings, change size and add call outs. Will break down subparts such as wheel assemblies. 

                                       

                                        REQUIREMENTS:

                                      • Technical Illustrator experience
                                      • Experience with design programs such as Pro-E and Creo.
                                      • Ability to break down subparts such as wheel assembly
                                      • Prior background in basic Hydraulics, Electronic or Drive Systems 

                                         EOE  M/F

                                        

                                       

                                       

                                       

                                       

                                       



                                      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                      Recruiter: Heidi Elam       
                                      eMail a friend about this job

                                      SKILLED TRADE WORKERS w. Active Secret Clearance

                                      CONTRACT POSITIONS

                                      INDUSTRY: SHIPYARD

                                      LOCATION: NORFOLK, VA

                                       

                                      • Cleared Pipefitters                     
                                      • Cleared Shipfitters                     
                                      • Cleared Structural Welders       
                                      • Cleared Outside Machinists       
                                      • Deck Tile Mechanic

                                        EOE  M/F



                                      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                      Recruiter: Heidi Elam       
                                      eMail a friend about this job

                                      SHIPYARD REPAIR WORKERS w. Active Confidential Clearance

                                      41 CONTRACT POSITIONS

                                      LOCATION: NORFOLK, VA

                                       

                                      CTR is currently recruiting for Ship Repair Workers with Active Confidential Clearance.

                                      •  8 Red Badge Shipwrights                                             $21/hr
                                      •  8 Red Badge Supervisors                                             $26.50/hr
                                      •  10 Red Badge Marine Electricians                                $21/hr
                                      •  15 Red Badge Riggers                                                  $20/hr

                                      Must hold a Confidential Clearance. Must be RapidGate eligible.

                                      Recent US Navy Personnel strongly encouraged to apply. We pay referral bonuses.

                                       

                                      EOE M/F 



                                      To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                      Recruiter: Heidi Elam       
                                      eMail a friend about this job

                                      PACKAGING ENGINEER / LOGISTICS PM

                                      A DIRECT-HIRE POSITION with Outstanding Benefits. Relocation Assistance is Available.

                                      INDUSTRY: MANUFACTURING

                                      LOCATION: NEWPORT NEWS, VA 


                                      SUMMARY:

                                       Will design, develop, and establish packaging solutions and standards. Will also manage projects to improve warehouse infrastructure, material flow, and warehouse systems.

                                      • Capture warehouse and manufacturing needs using  internal and external sources for packaging material and services for delivery
                                      • Work with Company affiliates, suppliers and companies worldwide to develop packaging standards and requirements
                                      • Determine best packaging methods (e.g. tote, rack, crate) for incoming material flow of more than 12,000 active parts
                                      • Determine packaging fleet sizes and dunnage for safe and efficient transport and handling of material
                                      • Monitor incident system for packaging issues and suggest improvements
                                      • Ensure that all packaging procedures and processes conform to ISO guidelines
                                      • Manage continuous improvement planning and initiatives
                                         

                                       REQUIREMENTS:

                                      • B.S. degree in Packaging Engineering, Logistic Management, or Industrial Engineering or equivalent with 6 years Packaging experience, or equivalent combination of education and experience
                                      • APICS CPIM certification is a plus
                                      • 8 years of  experience in the Mining Equipment industry
                                      • Must be available to travel within the US and internationally up to 20% of the time
                                      • German or French language skills preferred, but not required.

                                         

                                            EOE   M/F

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        CNC MACHINIST III: PRODUCTION, 3rd Shift

                                        A DIRECT-HIRE POSITION with Excellent Benefits

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: CHESAPEAKE

                                        PAY RANGE:  up to 43,770 per year

                                         

                                        SUMMARY:

                                        Set up and operate multi-axis CNC Machines (lathes, mills- both horizontal and vertical, incl. multi-0pallet machining centers, grinders, broaches, & testing equipment). Set up and operate manual and semi-automatic lathes, mills, grinders, tool grinders, drills, broaches, gear hobbers, shears, etc.

                                         REQUIREMENTS:

                                        • Minimum 10 years of experience operating a mix of manual, semi-automatic, and CNC machine tools in a fast paced work environment
                                        • Minimum 5 years of CNC machining experience
                                        • At least 5 years of experience in high volume production - low mix production
                                        • At least 2 years of experience in low volume -high mix production
                                        • Expertise and experience using measuring instruments such as micrometers, calipers, height/depth/bore gauges) and tool presetters
                                        • Expertise in reading & interpreting complex drawings and blueprints in both imperial and metric standards
                                        • Expertise in calculating dimensions and tolerances using knowledge of mathematics (geometry, trigonometry) and part drawings / standards
                                        • Expertise in measuring perpendicularity, parallelism, concentricity, and  run out in micron or submicron level resolutions on manufactured components
                                        • Experience in proving out prototype parts and first piece run for CNC programs generated by CAM packages
                                        • Proficiency in reading and understanding CNC programs (G&M code)
                                        • Proficiency in setup, operation and basic maintenance of CNC lathes, mills --horizontal and vertical--incl. multipallet machining centers, grinders, boring machines, broaches, gear generation, and testing equipment.
                                        • Proficiency in setup, operation, and basic maintenance of Manual lathes, mills, grinders, tool grinders, drills, broaches, shears, gear hobber, band saw.
                                        • Ability to set up, adjust, and operate all machine tools in order to perform precision machining operations while holding very close tolerances
                                        • Ability to read and understand complex engineering drawings & blueprints; good grasp of GD & T
                                        • Excellent grasp of mathematics (incl. geometry & trigonometry) and good understanding of mechanical systems
                                        • Good understanding of metallurgy, especially cast iron, grey cast & ductile iron, steel, stainless steel 304/316/416.
                                        • Complete understanding of common gauges & measuring instruments (gauge blocks, micrometers, calipers, height gauge, depth gauge, bore gauges, Mahr gages, etc.
                                        • Experience in accurately diagnosing tool wear by visual inspection or by listening to the process and in making necessary adjustments to control the process.
                                        • Clean background required

                                         

                                        EOE M/F



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        CONVENTIONAL MACHINISTS

                                        2 TEMP-HIRE POSITIONS, after 90 Days

                                        INDUSTRY: MACHINE SHOP

                                        LOCATION: PORTSMOUTH, VIRGINIA


                                         

                                        REQUIREMENTS:

                                        • Minimum 3 years of experience operating manual lathe and mill
                                        • Experience working with large parts
                                        • Ability to read blueprints
                                        • Own tools
                                        • Must pass background check

                                         

                                        EOE   M/F



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        SAFETY / COMPLIANCE MANAGER: MINING EQUIPMENT

                                        A DIRECT-HIRE POSITION with Excellent Benefits

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: NEWPORT NEWS, VA

                                        SALARY RANGE: $80K - $100K or higher

                                        SUMMARY:

                                        Ensure compliance of all Mining Trucks to Company Equipment and regulatory standards. Develop safety policies and procedures within the Engineering department. Develop risk assessment activities. Train and mentor engineers and other staff on safety philosophies. Coordinate all activities related to new and revised national and international standards that may impact the Company. Supervise Compliance Engineer and four other employees.

                                         

                                        REQUIREMENTS:

                                        • B.S. degree in Safety Engineering or related Engineering discipline and 15 years of related experience or equivalent combination of education and experience.
                                        • Minimum 2 years of experience managing technical personnel.
                                        • Knowledge of Safety Engineering principles
                                        • Knowledge of Regulatory Standards as they apply to Off-Highway Mining Trucks
                                        • Experience with CAD and ProE drafting tools
                                        • Knowledge of BaaN system related to  truck Bill of Materials (BOM) structure and inventory control
                                        • Working knowledge of mathematical concepts such as algebra, probability and statistical inference and fundamentals of plane and solid geometry and trigonometry.
                                        • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
                                        • Project Management experience
                                        • Knowledge of inventory software, order processing systems, Project Management software, Microsoft Excel and Word.
                                        • Up to 20% domestic and international travel
                                        • Valid driver's license and ability to obtain passport
                                        • Able to obtain Mine Safety & Health Administration (MSHA) certification

                                         EOE  M/F

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        PROCUREMENT SPECIALIST /  STRATEGIC BUYER

                                        A DIRECT-HIRE POSITION with Excellent Benefits

                                        LOCATION: NEWPORT NEWS, VA

                                        INDUSTRY: MANUFACTURING

                                        SALARY RANGE: $55K - $70K 

                                         

                                        JOB SUMMARY:

                                        Coordinate procurement of materials, parts, equipment and supplies for the corporation.

                                         

                                        REQUIREMENTS:

                                        • Bachelor's degree in Business Administration / Management or Industrial Engineering or equivalent combination of education and experience
                                        • Minimum 5 years of material procurement experience in a manufacturing setting
                                        • APICS (CPIM) certification or equivalent strongly preferred
                                        • International procurement experience a plus


                                        Competencies:

                                        • Advanced knowledge of procurement principles, theories and processes
                                        • Able to work and interact well in a multi-cultural global environment
                                        • Able to facilitate cross functional teams
                                        • Able to calculate figures, discounts, interest, commissions, percentages, fractions, ratios
                                        • MS Outlook, Contract Management systems, MS SharePoint, SAP or BaaN or equivalent ERP system for Order Processing, Inventory, Manufacturing, Cost Calculation system and MS Office
                                        • Able to read and interpret scientific and technical documents and specifications, financial reports and legal documents

                                         

                                        -          Strategic Sourcing

                                        -          Commodity Management

                                        -          Commercial discussions/negotiations with suppliers

                                        -          Cost saving

                                        -          Supplier Management

                                        o   Supplier Agreements

                                        o   Supplier Evaluation

                                        o   Supplier Audits

                                        o   Supplier Development

                                        o   Supplier Risk Management

                                        -          Benchmarking or investigating marked trends on materials

                                        -          Identification of cost reduction potential

                                          

                                        EOE  M/F 



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        PLANNER: METAL FABRICATION

                                        A TEMP-HIRE POSIITON after 90 Days

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: TOANO (Greater Williamsburg Area)

                                         

                                        SUMMARY: 

                                        Seeking a Planner for metal fabrication shop. Must be able to read drawings, plan full projects, and use operating system E2.

                                         

                                        EOE  M/F

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        ESTIMATOR: METAL FABRICATION

                                        A TEMP-HIRE POSIITON after 90 Days

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: TOANO (Greater Williamsburg Area)

                                         

                                        SUMMARY: 

                                        Seeking an Estimator for metal fabrication shop. Must be able to read drawings, estimate full projects, create quotes. Familiarity with operating system E2 a plus.

                                         

                                        EOE  M/F

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        CNC MACHINIST / PROGRAMMER

                                        A TEMP-HIRE POSITION with Excellent Benefits

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: TOANO (Greater Williamsburg Area)

                                           

                                         REQUIREMENTS:

                                        • High school diploma or GED 
                                        • Experience setting up and operating CNC lathes and mills
                                        • Read blueprints
                                        • Edit G and M codes
                                        • Ability to program in MasterCAM
                                        • Prior machine shop experience a must
                                        • Own tools required
                                        • Must be able to pass criminal background check

                                         

                                        EOE  M/F

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        WELDER / FITTERS

                                        2 TEMP-HIRE POSITIONS

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: TOANO (Greater Williamsburg Area)

                                        PAY RATE: $13 per Hour for Entry Level up to $24 for TIG Aluminum Welder

                                         

                                        REQUIREMENTS: 

                                        • Apprentice School graduate for Entry Level position (Shipyard Welding Apprentices welcome)
                                        • Experienced Welders must be able to read blueprints and TIG weld aluminum
                                        • Experience in a Shop or Manufacturing setting 

                                         

                                        EOE  M/F 



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        CALIBRATION & MEASUREMENT TECHNICIAN

                                        A TEMP-HIRE POSITION

                                        INDUSTRY: MANUFACTURING / MACHINE SHOP

                                        LOCATION: NEWPORT NEWS  

                                        PAY RANGE: $15- $20 per Hour

                                          

                                        REQUIREMENTS:

                                        • Must be familiar with calibration of dimensional measuring equipment and hand tools
                                        • Knowledge of ISO 17025

                                         

                                        EOE / M/F

                                         



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        SHIPPING & RECEIVING, ELECTRONICS

                                        A TEMP-HIRE POSITION, after 90 days

                                        INDUSTRY: MANUFACTURING

                                        LOCATION: NEWPORT NEWS, VA

                                        PAY RATE: $12-14 per hour

                                         

                                        REQUIREMENTS:

                                        • Minimum 1 year of Shipping & Receiving Experience, preferably in Manufacturing
                                        • Experience processing S&R documents
                                        • Good computer skills, Oracle a plus
                                        • Experience pulling parts off shelves
                                        • Strong background in part numbers
                                        • Ability to lift 50-60lbs
                                        • Electronic part knowledge a plus
                                        • Must be able to pass background check

                                        EOE  M/F



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        Medical Front Office assistant needed for specialty practice located in Williamsburg, VA.  Office hours are Monday thru Thursday.  This position is full-time and available ASAP.  Experienced only, please.

                                         

                                        Send resume and references to Recruiter for immediate consideration. 



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Melody Fortune       
                                        eMail a friend about this job

                                        MIG / TIG WELDER / FITTER

                                        A TEMP-HIRE POSITION 

                                        INDUSTRY: MACHINE SHOP

                                        LOCATION: CHESAPEAKE 

                                        PAY RANGE: $18-20 per hour 

                                         

                                        SUMMARY: 

                                        Seeking a TIG & MIG Welder who is highly skilled in aluminum and stainless tig, mig, and fluxcore welding techniques. The workplace setting will be a machine shop and will be producing parts according to government specifications. Must be able to work from blueprints.

                                        Will be asked to pass a Tig and Mig test on aluminum.

                                         

                                      • EOE M/F



                                      • To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job
                                        LPN needed for busy ENT Practice located in Williamsburg. Full-time. Looking for a candidate who wants a long-term position. The LPN will go through extensive allergy training and will become Supervisor for the allergy department in Williamsburg and Gloucester. Send resume and references for immediate consideration.

                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Melody Fortune       
                                        eMail a friend about this job

                                        DELIVERY DRIVER / LOADER

                                        A TEMP-HIRE POSITION after 90 Days

                                        INDUSTRY: HOSPITALITY / INDUSTRIAL LAUNDRY SERVICE

                                        LOCATION: WILLIAMSBURG

                                        PAY RATE: $10 - $11 per hour. Will work lots of overtime (50-60 hours / week)

                                        Shift: Fri, Sat, Sun, Mon & Tues, 6am-4:30pm or 5pm or longer (until deliveries are done)

                                        Every other week must work Wednesdays (5 days one week, and 6 days the next week)

                                        On Tuesdays must work a longer shift, typically until 5pm or as late as 7:30pm 

                                         

                                        SUMMARY:

                                        Seeking a Delivery Driver to make deliveries to timeshares throughout Williamsburg. Will load and unload large rolling laundry carts throughout the day.

                                         

                                        REQUIREMENTS:

                                        • Virginia driver's license required
                                        • Good driving record
                                        • Will be driving a box truck
                                        • Physical stamina required
                                        • Able to load and unload large rolling laundry bins throughout the day
                                        • Must be presentable in order to deliver parts to customers
                                        • Ability to pass criminal background check
                                        • Able to pass a drug test

                                        EOE M/F

                                         


                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Heidi Elam       
                                        eMail a friend about this job

                                        Dermatology Practice located in Newport News/Williamsburg is searching for a medical assistant to join their team.  Full-time hours. Competitive hourly wage. Dermatology experience is desired, but will consider a background in General Surgery or Plastic Surgery/Family Medicine.  Experienced Medical Assistant with good EMR skills.  FAST -PACED.

                                        Monday-Friday.  Pay is D.O.E. 

                                        Send resume for immediate consideration to Recruiter.



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Melody Fortune       
                                        eMail a friend about this job

                                        Experienced Medical Office Assistant/Medical Assistant needed for Specialty Medical Practice in Newport News.  Experienced in both front and clinical skills.  Basic front office duties to include patient scheduling and entering demographics and insurance information, Check in/ Check out, insurance verification and MA rooming duties. Other duties as required.  MA needs to be Registered or Certified.

                                        Hours are approx. 8:00a to 5:00p Wed, Thur and Friday;

                                        Send resume and references for immediate consideration.



                                        To Apply: For prompt consideration, paste or attach your resume to an e-mail (click my address below), or see my page for an address or phone numbers.

                                        Recruiter: Melody Fortune       
                                        eMail a friend about this job

                                        notices...

                                        Now you can join our. . .
                                        Talent Network
                                        • Sign up for job alert emails
                                        • Search by location
                                        • Apply online
                                        • Submit your resume